Orkut Gmail Agenda Docs Web mais »
Grupos visitados recentemente | Ajuda | Acessar
Página inicial dos Grupos do Google
New This Weekend On The Jon Banquer Blog
Há um número excessivo de tópicos que aparecem em primeiro plano neste grupo. Para fazer com que este tópico apareça primeiro, elimine essa opção de um outro tópico.
Erro ao processar a solicitação. Tente novamente.
Modo de exibição padrão   Exibir como árvore
sinalizar
  7 mensagens - Recolher todas  -  Traduzir tudo para Traduzido (ver todos os originais)
O grupo no qual você está postando é um grupo da Usenet. As mensagens postadas neste grupo farão com que o seu e-mail fique visível para qualquer pessoa na internet.
Sua resposta não foi enviada.
Postagem publicada
 
De:
Para:
Cc:
Encaminhar para
Adicionar Cc | Adicionar Encaminhar para | Editar Assunto
Assunto:
Validação:
Com o objetivo de verificação, digite os caracteres que você vê na figura abaixo ou os números que ouvir ao clicar no ícone de acessibilidade. Ouça e digite os números que ouvir
 
Joe788  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 8 nov, 21:07
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Joe788 <larryro...@yahoo.com>
Data: Sun, 8 Nov 2009 15:07:01 -0800 (PST)
Local: Dom 8 nov 2009 21:07
Assunto: New This Weekend On The Jon Banquer Blog
Where has all the development for Delcam Featurecam really been
going?

http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

No need to put up with worthless gossip, off topic political nonsense,
etc. in these newsgroups from the usual suspects when you can read the
Jon Banquer blog and get the real story!

The Jon Banquer blog is the leading CAM-centric blog in the internet
and gets hundreds of hits per day. If you're not reading the Jon
Banquer blog you can be sure of one thing... your competition is! ;>)


    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Cliff  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 8 nov, 21:33
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks, alt.cad
De: Cliff <Clhuprichguessw...@aoltmovetheperiodc.om>
Data: Sun, 08 Nov 2009 18:33:23 -0500
Local: Dom 8 nov 2009 21:33
Assunto: Re: New This Weekend On The Jon Banquer Blog

On Sun, 8 Nov 2009 15:07:01 -0800 (PST), Joe788 <larryro...@yahoo.com> wrote:
>Where has all the development for Delcam Featurecam really been
>going?

>http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

>No need to put up with worthless gossip, off topic political nonsense,
>etc. in these newsgroups from the usual suspects when you can read the
>Jon Banquer blog and get the real story!

>The Jon Banquer blog is the leading CAM-centric blog in the internet
>and gets hundreds of hits per day. If you're not reading the Jon
>Banquer blog you can be sure of one thing... your competition is! ;>)

  You just linked to an ad again.
  You know nothing at all about it.
  Nor is this in any way what you promised us WEEKS AGO !

  A few things jump right out at me ....
http://www.youtube.com/watch?v=JehjqlzXwIQ
--
Cliff


    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Zymrgy  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 8 nov, 23:10
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Zymrgy <zym...@gmail.com>
Data: Sun, 8 Nov 2009 17:10:37 -0800 (PST)
Local: Dom 8 nov 2009 23:10
Assunto: Re: New This Weekend On The Jon Banquer Blog
On Nov 8, 4:07 pm, Joe788 <larryro...@yahoo.com> wrote:

> Where has all the development for Delcam Featurecam really been
> going?

> http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

> No need to put up with worthless gossip, off topic political nonsense,
> etc. in these newsgroups from the usual suspects when you can read the
> Jon Banquer blog and get the real story!

> The Jon Banquer blog is the leading CAM-centric blog in the internet
> and gets hundreds of hits per day. If you're not reading the Jon
> Banquer blog you can be sure of one thing... your competition is! ;>)

Yoni...are you still having a identity crisis? I note that you are
still using someone else's alias.....dude, give it up. No matter what
identity you use, you are still the same loser. Good gawd....a
horrible thought just passed through my mind...have you renamed your
right hand from Michelle to Joe788? (well...not so horrible for
me...but damn I feel for Joe). Also noteworthy is you once again gave
yourself the all important google "5 star rating". Nicely done
Yoni...Nicely done.

    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Half-nutz  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 8 nov, 23:32
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Half-nutz <3...@centurytel.net>
Data: Sun, 8 Nov 2009 17:32:14 -0800 (PST)
Local: Dom 8 nov 2009 23:32
Assunto: Re: New This Weekend On The Jon Banquer Blog
On Nov 8, 5:07 pm, Joe788 <larryro...@yahoo.com> wrote:

> Where has all the development for Delcam Featurecam really been
> going?

> http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

> No need to put up with worthless gossip, off topic political nonsense,
> etc. in these newsgroups from the usual suspects when you can read the
> Jon Banquer blog and get the real story!

> The Jon Banquer blog is the leading CAM-centric blog in the internet
> and gets hundreds of hits per day. If you're not reading the Jon
> Banquer blog you can be sure of one thing... your competition is! ;>)

How pathetic, and to what depths do you have to sink when you publicly
use someone else identity because your own name is so shameful?
How pathetic is it when you try to humiliate someone else by acting
like yourself, and using their name?

What does Qualcomm think of you forging someone else identity?


    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Joe788  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 9 nov, 02:16
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Joe788 <larryro...@yahoo.com>
Data: Sun, 8 Nov 2009 20:16:57 -0800 (PST)
Local: Seg 9 nov 2009 02:16
Assunto: Re: New This Weekend On The Jon Banquer Blog
Where has all the development for Delcam Featurecam really been
going?

http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

No need to put up with worthless gossip, off topic political nonsense,
etc. in these newsgroups from the usual suspects when you can read the
Jon Banquer blog and get the real story!

The Jon Banquer blog is the leading CAM-centric blog in the internet
and gets hundreds of hits per day. If you're not reading the Jon
Banquer blog you can be sure of one thing... your competition is! ;>)


    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Joe788  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 9 nov, 13:53
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Joe788 <joemama...@aol.com>
Data: Mon, 9 Nov 2009 07:53:19 -0800 (PST)
Local: Seg 9 nov 2009 13:53
Assunto: Re: New This Weekend On The Jon Banquer Blog
On Nov 8, 5:32 pm, Half-nutz <3...@centurytel.net> wrote:

Pretty sad huh? Just google "Jon Banquer Crack Whore", and enjoy the
madness. It only took him 10+ years of humiliating himself before he
realized his ridiculous name calling was only hurting himself.
Serious, *serious* mental problems.

    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Joe788  
Ver perfil   Traduzir para Traduzido (ver original)
 Mais opções 9 nov, 13:56
Grupos de notícias: alt.machines.cnc, rec.crafts.metalworking, comp.cad.solidworks
De: Joe788 <joemama...@aol.com>
Data: Mon, 9 Nov 2009 07:56:01 -0800 (PST)
Local: Seg 9 nov 2009 13:56
Assunto: Re: New This Weekend On The Jon Banquer Blog
On Nov 8, 8:16 pm, Joe788 <larryro...@yahoo.com> wrote:

> Where has all the development for Delcam Featurecam really been
> going?

> http://jonbanquer.wordpress.com/new-delcam-for-solidworks-video/

> No need to put up with worthless gossip, off topic political nonsense,
> etc. in these newsgroups from the usual suspects when you can read the
> Jon Banquer blog and get the real story!

> The Jon Banquer blog is the leading CAM-centric blog in the internet
> and gets hundreds of hits per day. If you're not reading the Jon
> Banquer blog you can be sure of one thing... your competition is! ;>)

'Tis a shame that all we get now is Copy/Paste Banquer. Uninformed
Incorrect Broad Statment Banquer was a lot more fun. When do your meds
run out again Jon, so we can get our little self humiliating buddy
back?

    Responder    Responder ao autor    Encaminhar  
É necessário Acessar antes de postar mensagens.
Para postar uma mensagem você precisa primeiro participar deste grupo.
Atualize seu apelido na página de configurações da inscrição antes de postar.
Você não tem a permissão necessária para postar.
Fim das mensagens
« Voltar às Discussões « Tópico recente     Tópico antigo »

Criar um grupo - Grupos do Google - Página inicial do Google - Termos de Uso - Política de Privacidade
©2009 Google